Pumpgatan 3, 417 55 Gothenburg

All visitors will need to check in at the kiosks at Lynk & Co reception and get approved by host before getting through the speed gates. Hosts should always pick up the visitors and escort them in the building during visit.

Visitors should check out at the kiosks and leave back the visitor tags to reception after the visit.

WIFI name: Uni3_Guest

Need to agree to terms in a browser before accessing the internet.

Access through Reception area or if you have a parking space, through the garage.

Incoming letters

Incoming letters are delivered to CEVT reception for pick up.

Outgoing letters 

Outgoing letters are handled via CEVT reception.

Express delivery 

For express delivery, please contact CEVT reception.

You can find a vending machine in the lunch area.

Geely Design Center Gothenburg takes care of its own goods receiving. The goods delivery address is Pumpgatan 3 and the goods unloading area is located in the garage.

If you would like to know more about goods receiving policy, please contact Geeky Design reception.

At Geely Design Center Gothenburg, there is  a fire and evacuation alarm system to ensure that in case of emergency or fire, everyone affected in the building will be alerted in time.

It is important to know that the alarm is sequenced, meaning that only directly affected and adjacent areas will sound the fire and evacuation alarm. This is to avoid a mass evacuation of the building.

• Alarm from 1 detector within floor 0 only activates the evacuation alarm within floor 0
• Alarm from 2 detectors also activates levels 1–3 and a spoken evacuation alarm.
• Alarm from detector floor 1–3 activates evacuation alarm within floors 1–3 as well as spoken evacuation alarm.
• Alarm from detectors within floors 4–4.5 only activates evacuation alarm within floors 4–4.5
• Aspirations system is activated evacuation alarm within floor 1–4.5
• Alarms in stairwells, lift, shafts and fire protection panels (BFT) activate evacuation alarms on all floors.
• Alarm within the aspirations system in the light yard activates the evacuation alarm within floor 1–4.5
• Detectors within stairwells and elevator shafts and alarm buttons at BFT activate evacuation alarm on all floors.
• Elevators will move to the ground floor where they will remain until reset.

The assembly point is located at Hugo Hammars quay.

Click here to see more details about evacuation.

Floor 0

• 1 defibrillator by the elevators
• 1 first aid kit in car storage
• 1 first aid kit by the car lift

Floor 1

• 1 defibrillator by the speedgates
• 1 first aid kit by the toilets in the lounge
• 1 first aid kit by the toilets in “back of house”
• 1 first aid kit in 3 D Printer Room

Floor 2

• 1 defibrillator by the elevators
• 2 first aid kit, one in each toilet area

Floor 3

• 1 defibrillator by the elevators
• 2 first aid kit, one in each toilet area

Floor 4

• 1 defibrillator by the elevators
• 1 first aid kit and eyewash in paint prep room
• 1 first aid kit in the workshop

Floor 5

1 first aid kit close to the stairs

Climate curtains are located on the west and south facades (and east on floor 1) with individual light sensors. If the sun light is brighter than the set point, the curtains will roll down with a 5-minute delay. If it is darker than the set point, the curtains roll up with a 30-minute delay.

You can manually override the curtains.

Lights in the building are activated by motion detector to its maximal value in public areas.

If there are any light switches in the premises, you can adjust the light by pressing and holding button 1. You can also switch off by pressing button 1 shortly. Please note that some rooms may have special functions.

All lights will be off when the burglar alarm is activated.